industa 300

Allgemeine Anmerkungen zu Produkten - General informations about products

Moderatoren:Estradas, Cordula Jorczik

Gesperrt
FoxVK
Beiträge:1
Registriert:Fr Mär 20, 2009 4:31 pm
industa 300

Beitrag von FoxVK » Fr Mär 20, 2009 6:28 pm

Hello

I want to make regulator for this soldering iron by myself.

How this station measure temperature? by thermocouple ? AND to which pins is it conected to ? 1-2 ?
Bild(male connector on the cable)

Thanks you.
I am sorry for my very bad english.

Herbert Schmidt
Site Admin
Beiträge:20
Registriert:Fr Jun 25, 2004 10:42 pm
Kontaktdaten:

Beitrag von Herbert Schmidt » Mi Mär 25, 2009 11:40 am

Hello,

the Industa 300 has no thermocouple in the soldering iron.

The temperature is controlled by the analysis of the signal for the phase controlled modulator, which regulates the power to the soldering iron.

Pin 1 and 3 are connected to the heating element in the iron.
Pin 2 is not connected.

For you own regulator you will have now temperature signal availbale.

Best regards

Herbert Schmidt

Gesperrt