I want to make regulator for this soldering iron by myself.
How this station measure temperature? by thermocouple ? AND to which pins is it conected to ? 1-2 ?
(male connector on the cable)Thanks you.
industa 300
Moderatoren:Estradas, Cordula Jorczik
Hello
I want to make regulator for this soldering iron by myself.
How this station measure temperature? by thermocouple ? AND to which pins is it conected to ? 1-2 ?
(male connector on the cable)
Thanks you.
I want to make regulator for this soldering iron by myself.
How this station measure temperature? by thermocouple ? AND to which pins is it conected to ? 1-2 ?
(male connector on the cable)Thanks you.
I am sorry for my very bad english.
-
Herbert Schmidt
- Site Admin
- Beiträge:20
- Registriert:Fr Jun 25, 2004 10:42 pm
- Kontaktdaten:
Hello,
the Industa 300 has no thermocouple in the soldering iron.
The temperature is controlled by the analysis of the signal for the phase controlled modulator, which regulates the power to the soldering iron.
Pin 1 and 3 are connected to the heating element in the iron.
Pin 2 is not connected.
For you own regulator you will have now temperature signal availbale.
Best regards
Herbert Schmidt
the Industa 300 has no thermocouple in the soldering iron.
The temperature is controlled by the analysis of the signal for the phase controlled modulator, which regulates the power to the soldering iron.
Pin 1 and 3 are connected to the heating element in the iron.
Pin 2 is not connected.
For you own regulator you will have now temperature signal availbale.
Best regards
Herbert Schmidt